AC 385V Surge Protective Device SPD 20-40ka 1p
Surge Protective Device SPD DC 3P 1000V 1500V 20KA~40KA Surge Protection Surge Arrester House Din Rail Solar Surge Protector.
Product Introduction
Our company will build an independent brand in the Green Plastic SPD, Power Line SPD, Metal Oxide Square Disc Varistors industry with the enterprise spirit of "honesty, stability, objectivity and professionalism". In the new era, we will adhere to the business philosophy of innovation and opening up, partnership, mutual benefit and win-win, and stability. We comprehensively improve the economic efficiency of the company, strive to build an efficiency-oriented enterprise, promote the innovation of management mechanism, and promote the restructuring of the company's operation. The quality of our products is stable and reliable for a long time, and is favored by the majority of customers. With international vision and standard, we will make the quality good, make the brand strong and make the enterprise bigger with our heart.
Surge Protective Device SPD DC 3P 1000V 1500V 20KA~40KA Surge Protection Surge Arrester House Din Rail Solar Surge Protector.
Description
AC Surge Protector SPD I2R-T112 DIN-Rail 230 Vac Single-Phase MOV 50 kA, IEC 61643-11 Class I+II, CE, RoHS.
Transtector AC surge protector / arrester (Also known as alternating current surge protection device or SPD as well as transient voltage surge suppressor or TVSS) I2R-T112-1P230 is in-stock and will ship same business day as purchased from us. Our AC surge protector / SPD provides overvoltage protection for your equipment and supports long-term system reliability by absorbing high amounts of transient energy while maintaining a low clamping voltage. This industrial surge protector for AC helps prevent damage from VAC overvoltage that can be caused by lightning surge and other strong electrical power spikes. The transient voltage suppressor / TVSS protection device can act as a lightning surge protector / arrestor as well as an AC electrical overvoltage spike surge protection device.
AC surge protector device part number I2R-T112-1P230 from Transtector is designed to protect sensitive electric and electronic equipment from transient voltage. This TVSS product for alternating current offers high quality electrical surge suppressor protection. Our electrical surge protection unit is rated for indoor use. The indoor SPD for AC is a din-rail type design.
Indoor industrial electrical surge protection din-rail is part of the Transtector I2R-T112 series. I2R-T112-1P230 TVSS indoor AC surge protector is for 230 Vac applications. The 230V AC TVSS is a single-phase surge protector. Our single-phase 230V SPD is just one of many alternating current protection devices that ship same-day from Transtector.
Single-phase surge protector din-rail for lightning protection and other spikes in electrical power has a maximum amperage of 50 kA.
Our industrial AC electrical / lightning SPD is rated at 50 kA on 230V. Transtector TVSS AC power protection device PDF datasheet with details of specifications and CAD drawing with dimensions for I2R-T112-1P230 can be found above.
Protection from AC electrical surge in this Transtector din-rail component is in the form of Metal Oxide Varistor (MOV). This AC SPD uses Metal Oxide Varistor (MOV) circuits to protect electrical devices from spikes in alternating current power. Transient voltage surge suppression from lightning and strong electrical spike events are handled through Metal Oxide Varistor (MOV) protection circuits in the I2R-T112-1P230 SPD. I2R-T112-1P230 commercial surge protector for AC power is IEC 61643-11 Class I+II, CE, RoHS rated.
Transtector provides one of the largest selections of same-day ship industrial power surge protector devices. Like our AC Surge Protector SPD I2R-T112 DIN-Rail 230 Vac Single-Phase MOV 50 kA, IEC 61643-11 Class I+II, CE, RoHS, we ship our other electrical surge protection equipment from in-stock inventory same-day as purchased. Transtector supports our customers with a sense of urgency while providing innovative power and signal solutions that ensure reliable operation of critical systems for a connected world.
Surge protective device 20KA-40kA Power ac surge protection 380V.
Description
● Intensity of Remote Signalling Alarm Contact
● Failure indication and centralized remote signalling alarm dry contacts;
● High discharge capacity and low residual voltage;
● Over-temperature protection;
● IP20, UL94 V0;
SPD according IEC 61643-1 | Class II |
SPD according EN 61643-11 | Type 2 |
Operating Temperature Range | -40ºC~+80ºC |
Relative Humidity | ≤95%(25ºC) |
Atmospheric Pressure | 86~106kPa |
Working Frequency | 50/60Hz |
Rated Working Voltage Uo | 230V/400V~ |
Max Continuous Operating Voltage Uc(L-N) | 275V/320V/385V/420V ~ |
Mode of protection | L-N/N-PE |
Nominal Discharge Current In(8/20μs)(L-N) | 20kA |
Max Discharge Current Imax (8/20μs) (L-N) | 40kA |
Voltage Protection Level Up(L-N) | ≤1.2kV |
Max. mains-side Overcurrent Protection | 80A(gL/gG) |
Cross sectional area for wiring terminal connected to conductor | Stranded:4~25mm² |
Max. Cross-sectional Area For Remote Signaling Interface | 1.5mm² |
Torque: wiring terminal/remote signaling interface | 2.5Nm |
Enclosure material | PBTV-0 |
Degree of protection(IP code) | IP20 |
Mounting | DIN35mm rails |
ULTIMA series surge protector | ULTIMA PK100 | ||
PV DC specific (IEC 6614-1/EN 61643-11) | |||
Pole | 2 pole | 3 pole | |
Electrical Parameter | |||
Classifical test | II | II | |
Uoc max (V DC) | 500 | 900 | |
Uc (V DC) | 500 | 1000 | |
In(8/20)us (KA) | 20 | 20 | |
Imax(8/20)us (KA) | 40 | 40 | |
Up (KV) | 2.0 | 3.8 | |
Remote control and indication | |||
Indication window | |||
Plug-in module | |||
Remote signal contact | |||
Remote signal contact | Max working volt | 250V AC/30V DC | 250V AC/30V DC |
Max working amp 1A (250V/AC) | 1A (250V/AC) | 1A (250V/AC) | |
1A (30V DC) | 1A (30V DC) | 1A (30V DC) | |
Wiring & installation | |||
Wiring capacity(mm2) | Hard wire | 4-25 | 4-25 |
| Flexible wire | 4-16 | 4-16 |
Stripping length | 10 | 10 | |
Terminal screwa | M5 | M5 | |
Torque(Nm) | Main ciruit | 3.5 | 3.5 |
Remote signal contact | 0.25 | 0.25 | |
Protection class | All profile | IP40 | IP40 |
Connection port | IP20 | IP20 | |
Installation environment | No obvious shock and vibration | ||
Altitude(m) | ≤ 2000 | ≤ 2000 | |
Working temperature | -3.0--+70 | -3.0--+70 | |
Relative humidity | 30%-90% | 30%-90% | |
How to install | Install with H35-7.5/DIN35 stell mounting rail | ||
Size(mm) (W*H*L) | W | 36 | 54 |
H | 90 | 90 | |
L | 67.6 | 67.6 | |
Weight (KG) | 0.25 | 0.38 | |
Nominal PV system volt | 600V | 100V | 1200V |
MCOV(UCPV) | 700V DC | 1170V DC | 1200V DC |
Max system discharge Current (8/20us) (Imax) | 40KA | 40KA | 30KA |
Volt protection leve (UP) | ≤ 2.5KV | ≤ 4.0KV | ≤ 4.5KV |
Volt protection Level at 5KA (UP) | ≤ 2.0KV | ≤ 3.5KV | ≤ 4.0KV |
Integrate fuse breaking capacity/interrupting rating | 30KA/1000V DC | 30KA/1000V DC | 30KA/1200V DC |
Technology | Short-circuit interruption (SCI) overcurrent protection | ||
Operating temperature range | -40 to +80 | ||
Nominal discharge current | 12.5KA | ||
Response time (ta) | <25ns | ||
Operating state/fault indication | Green (good) / Red (replace) | ||
Mounting | 35mm DIN Rail per EN 60715 | ||
Degree protection | IP20 | ||
capacity | 3 modules DIN 43880 | ||
Our AC 385V Surge Protective Device SPD 20-40ka 1p strictly follow national standards to control product quality, and we provide perfect after-sales service. We will continue to meet the needs of users with continuous change and innovation, and create value for users and partners. We advocate employees to work, study, live and plan their work with the mentality of doing business.
Hot Tags: ac surge protective device spd, suppliers, manufacturers, factory, customized, wholesale, price, cheap, pricelist, quotation, free sample, lightning protection bracket oem, electrical component, Surge Protective Device, electronic equipment protection, surge protection analyzer oem, spd indicators
[[ProKeywords]]
